Home

우분투 usb grub

/mnt/boot/grub/grub.cfg # path to the partition holding ISO images (using UUID) set imgdevpath="/dev/disk/by-uuid/UUID_value" Alternatively, use the device label instead of UUID: A multiboot USB flash drive allows booting multiple ISO files from a single device. The ISO files can be copied to the device and booted directly without unpacking them first. There are multiple methods available, but they may not work for all ISO images

linux - Boot from USB using GRUB - Super Use

Everything is almost ready, now just create the grub configuration file to make the ISO files available to boot from USB drive. Create a text file with a text editor of your choice inside the ~/multiboot/boot/grub/ folder. Then put the text bellow./mnt/boot/grub/grub.cfg # path to the partition holding ISO images (using labels) set imgdevpath="/dev/disk/by-label/label_value" The necessary UUID or label can be found using lsblk -f. Do not use the same label as the Arch ISO for the USB device, otherwise the boot process will fail. Next you must create a hybrid MBR partition table, as setting the boot flag on the protective MBR partition might not be enough. Yes , it targeted for a non persistence use,actually for installing a new distro. A second partition , a good idea, but you could this partition too.menuentry '[loopback]archlinux-2017.10.01-x86_64.iso' { set isofile='/boot/iso/archlinux-2017.10.01-x86_64.iso' loopback loop $isofile linux (loop)/arch/boot/x86_64/vmlinuz img_dev=$imgdevpath img_loop=$isofile earlymodules=loop initrd (loop)/arch/boot/intel_ucode.img (loop)/arch/boot/amd_ucode.img (loop)/arch/boot/x86_64/archiso.img } See README.bootparams for archiso options supported in kernel command line.

Install GRUB2 on USB from Ubuntu Linux Pen Drive Linu

live usb - How do you install Grub2 on a USB stick? - Unix & Linux

  1. The Super Grub Disk is essentially a cleverly configured Grub installation on CD. This means it can handle all the tasks that a bootloader can handle, namely launching your OS
  2. Linux live USB drives are one of the most useful tool that every Linux user should keep handy. They are life saver in case of  system crash and configuration mess up.
  3. sudo grub-install /dev/sdc --target=i386-pc --boot-directory=~/multiboot/boot/ --forcenote: Use only /dev/sdc not /dev/sdc1 , wait for some time, this process may return some error message but it's fine.
  4. yeah, writing the proper grub.cfg very important. I too never could make a bootable fedora live USB by editing the grub.cfg, different distro uses different style boot process. Best of luck and never stop experimenting. Anyway I'll try to write a detailed post about writing the grub.cfg.
  5. # Multiboot USB drive GRUB configuration file #  By:~    https://www.pcsuggest.com set timeout=10 set default=0 insmod loopback menuentry "lubuntu 14.04.1 32 bit" { loopback loop /iso_boot/lubuntu-14.04.1-desktop-i386.iso set gfxpayload=keep linux (loop)/casper/vmlinuz boot=casper iso-scan/filename=/iso_boot/lubuntu-14.04.1-desktop-i386.iso noeject noprompt -- initrd (loop)/casper/initrd.lz } menuentry "kali linux 1.0.3 live" { set iso_file=/iso_boot/kali-linux-1.0.3-amd64.iso loopback loop $iso_file linux (loop)/live/vmlinuz boot=live noconfig=sudo username=root hostname=kali noswap noautomount initrd (loop)/live/initrd.img } menuentry "TinyCore Pure64 6.2" { set iso_file=/iso_boot/TinyCorePure64-6.2.iso loopback loop $iso_file linux (loop)/boot/vmlinuz64 loglevel=3 cde vga=normal initrd (loop)/boot/corepure64.gz }Finally modify the ~/multiboot/boot/grub/grub.cfg file according to your need.
  6. 对 GRUB 进行错误的配置可能会导致在没有外置启动设备(某些USB设备,某些 CD-ROM 等)的情况下 GRUB 对于硬盘和分区自有一套命名规则(hdN,M),其中 N 是硬盘数,M 是分区号
  7. sudo parted /dev/sdc toggle 1 bootWith cfdisk , just run the command and follow the interactive cfdik CLI interface and watch the * mark.

Multiboot USB drive - ArchWik

  1. Here is how to create a bootable USB flash drive to install Windows Vista, Windows 7, Windows 8 To make a Windows bootable USB there was an application called WinUSB but it is no longer under..
  2. WoeUSB is a Linux tool for creating bootable Windows USB sticks for installing Windows, from an ISO or DVD image. The free and open source program comes with both command line and graphical user..
  3. mkdir ~/multiboot sudo mount /dev/sdc1 ~/multiboot/ cd ~/multiboot/ mkdir boot mkdir iso_boot The boot directory to store GRUB bootloader related files and iso_boot directory to store Linux installer ISO files.

Can't boot from USB with grub? Foru

BootFromUSB - Community Help Wiki Booting via GRUB

The grubby tool can be used to read information from, and make persistent changes to, the grub.cfg file. In Red Hat Enterprise Linux 7, grubby defaults to working with the GRUB 2 configuration file.. This new version has many improvements. AFD Scanning technology has been improved with the United States of Spain gimmick. Rescapp now has proper logos, desktop icons and a window icon. Non English translations were removed from internal documentation. Many plugin documentations have been update to match 2019 gui. Finally the most important improvement is that Rescapp help is shown right at the Rescapp startup.

Is your Master Boot Record royally messed up? Who needs Live CDs? This video tutorial will show you how you can use an Ubuntu Live USB drive to do a complete reinstall of GRUB, even when your boot.. One of the best improvement has been done recently. Rescapp has been improved so that every option is properly documented (as well as a non native English speaker can write). Make sure that the USB drive is properly partitioned and that there is a partition with file system supported by Syslinux, for example fat32 or ext4. Then install Syslinux to this partition, see Syslinux#Installation on BIOS.

Video: Rescue your Windows & GNU/Linux systems - Rescatux & Super

Install the memdisk module

GNU GRUB (short for GNU GRand Unified Bootloader, commonly referred to as GRUB) is a boot loader package from the GNU Project. GRUB is the reference implementation of the Free Software Foundation's Multiboot Specification.. Now install the GRUB bootloader on the USB drive. Depending your your system, GRUB could be either x86_64-efi or i386-pc, but here we are going the use the i386-pc platform.

Note: This Grub2 USB Flash Drive Install tutorial assumes you will be running from an Ubuntu Live CD to create your Grub2 enabled Flash Drive. Grub2 USB Install From Ubuntu Live CD Essential How to make (HBCD) Hiren's BootCD to work from your USB Flash Drive ? Make sure you set your computer to boot from USB Flash Drive. To Enter the BIOS press the Del button on your keyboard

I made him a USB boot before I took a look at it and found that his BIOS cannot boot from USB. Is it possible using the GRUB console to get access to the USB and start the windows install Seeing nothing but the grub rescue prompt? Did Windows mess up your Master Boot Record? Using Ubuntu, GRUB 2 got you down? Who needs Live CDs

Grub config for creating my own bootable USB stick · GitHu

  1. 37 - Create a DOS Bootable USB drive (using grub4dos) suitable for BIOS flashing. 96 - Add an automatic linux ISO file menu to your grub4dos multiboot USB drive
  2. In most cases EFI_MOUNTPOINT will correspond to the /mnt/boot/EFI subdirectory on your mounted USB disk.
  3. The material on this wiki is available under a free license, see Copyright / License for detailsYou can contribute to this wiki, see Wiki Guide for details
  4. How do I create a bootable USB flash pen for installation of Linux, and for creation of rescue and other special-purpose boot disks using command line options? You need to format your USP pen device as..

The memdisk module was not installed during Syslinux installation, it has to be installed manually. Mount the partition where Syslinux is installed to /mnt/ and copy the memdisk module to the same directory where Syslinux is installed: GRUB and GRUB4DOS. In your menu.lst file, use something like Note that the <memsize> parameter for the (GRUB) uppermem command is interpreted as allow/show/allocate <memsize> KiB.. To reinstall grub, you need either a live CD/USB to access your current system , or you can use the rEFInd boot manager Choose your Linux Kernel and boot it. Reinstalling grub-efi on your hard drive It may happen that Your OS will not boot, the boot loader is corrupted. What to do in this case? Fortunately there are some specialized tools that will help You to load the operating system and then..

Grub Rescue - Complete Re-install of GRUB 2 from Live USB

Workaround: Install grub4dos and chainload grub2, see how the answers that are completely UNLIKE useful in this thread: http://www.boot-land...showtopic=10242. Now, if try to go another way and install grub2 on the USB disk itself, I can't understand how to install g2hdr.bin and g2ldr.mbr to USB disk's MBR # mkfs.fat -F32 /dev/sdX2 # mkfs.ext4 /dev/sdX3 You can now install GRUB to support both EFI + GPT and BIOS + GPT/MBR. The GRUB configuration (--boot-directory) can be kept in the same place. GRUB2 was designed with an improved chainload mode when compared to GRUB Legacy. The new ISO (or loop) chainload mechanism makes chainloading a breeze. It is possible to chainload ISO images (LiveCD/DVDs) with GRUB Legacy.. sudo mkfs.vfat -F 32 -n your_drive_name /dev/sdc1make sure that which drive and partition you want to format, in this case it was /dev/sdc1 and change your_drive_name with any name of your choice. Or use Gparted, there is lesser amount of risk involved with it.

Create a multiboot USB drive with GRUB in Linu

Grub Customizer is a special application that can be used to modify the Grub menu entries, color and some other settings. Its a handy application that comes with nice GUI Tagged: usb tutorials hardware Introduction. So you just got your new computer from Dell, HP, etc. and for some reason who knows what you need to boot from a boot disk. AHHHH WTF!! 在Win7下安装EasyBCD,添加一个启动项. 2. 进入Ubuntu下刷新下Grub. yuguiyang@yuguiyang-Aspire-4741:~$ sudo update-grub Generating grub.cfg. As it is recommend to use a persistent name instead of /dev/sdxY to identify the partition on the USB drive where the image files are located, define a variable for convenience to hold the value. If the ISO images are on the same partition as GRUB, use the following to read the UUID at boot time: As mentioned, Ubuntu 14.04 is installed on my old/legacy PC, with option acpi=off. In my legacy Fujitsu M2010 Netbook, it display in 800x600 only

Linux Mint booting usb를 이용한 우분투 와 민트 제거 (파티션 제거I&#39;m a dreamer, even though I awake

Caveat for 32-bit systems

This article or section needs language, wiki syntax or style improvements. See Help:Style for reference.Finally the complete nightmare of pop-ups that were shown when an option is run have been replaced by nice coloured scrolling messages. A cross-platform tool to flash OS images onto SD cards and USB drives safely and easily. + Some programs, usually oriented at making GNU/Linux live USB drives, include an option to set persistent.. After formating, mount the partition to a easily accessible folder with read write permission and create required folders.

Creating a bootable USB drive (UEFI / GRUB) AdminP

Rescatux 0.73 supports booting from UEFI Secure Boot and traditional BIOS. Both amd64 and 686 systems are supported. Documentation is now handled by the same processes we use for code: Add something to the Documentation/ directory in the coreboot repo, and it will be rendered to https://doc.coreboot.org/. Contributions welcome Grub2 is a very powerful boot loader, developed by GNU. You can easily install Grub2 on Windows with just a few commands I have a USB stick with a grub2 bootloader installed. Great tool when you want boot an iso without burning CD's. I now want to boot the FreeBSD..

Home site for RMPrepUSB and USB tutorial

Now format the drive with a single FAT32 partition, with software of your choice like Gparted or mkfs .It is assumed that the ISO images are stored in the boot/iso/ directory on the same filesystem where GRUB is installed. Otherwise it would be necessary to prefix the path to ISO file with device identification when using the loopback command, for example loopback loop (hd1,2)$isofile. As this identification of devices is not persistent, it is not used in the examples in this section. Using GRUB, any OS can be booted from any USB or CD/DVD drive (as above), circumventing BIOS restrictions. Placing passwords or locking menu items (in the GRUB configuration files) does not.. To complete the configuration, a boot entry for each ISO image has to be added below this header, see the next section for examples. Are you a professional Linux magazine/website article writer and you want to review Rescatux 0.73 before its official release? You can apply for your copy here.

HOW TO INSTALL GRUB TO A FLASH DRIVE Fun With Linux #

# grub-install --target=i386-pc --recheck --boot-directory=/DATA_MOUNTPOINT/boot /dev/sdX3 Configuring GRUB Using a template There are some git projects which provide some pre-existing GRUB configuration files, and a nice generic grub.cfg which can be used to load the other boot entries on demand, showing them only if the specified ISO files - or folders containing them - are present on the drive. Create at least one partition and a filesystem supported by GRUB on the USB drive. See Partitioning and File systems#Create a file system. Choose the size based on the total size of the ISO files that you want to store on the drive, and plan for extra space for the bootloader.

Search

# mount /dev/sdX3 /mnt # mkdir -p /mnt/boot/EFI # mount /dev/sdX2 /mnt/boot/EFI Then, you can install GRUB for UEFI with: boot/syslinux/syslinux.cfg LABEL some_label LINUX memdisk INITRD /path/to/image.iso APPEND iso See memdisk on Syslinux wiki for more configuration options. Now copy the ISO files of various distributions like Ubuntu, Debian, Linux Mint etc. to the ~/multiboot/iso_boot folder. Use a file manager like Nautilus , Dolphin, etc. or do it with the cp command.

UEFI Boot specific options

In this week's episode of Fun With Linux, we go over how to take your existing Grub bootloader installation, and install it to a removable flash drive for.. A perfect USB stick for me need in addition to storing files, be a powerful tool for all situations. Thinking about it, I used the GRUB2 and some tricks to create a bootable stick that runs perfectl Because seamless data transfer between Linux, Windows and Mac, here ext2 is not best choice. I use bootable USB drives for data transfer to. from now on, GRUB will pause when the ENTER key is used before starting to load Windows. When the Windows USB stick is completed, WoeUSB displayed the following message: Installation failed

I am unable to keep a proper forum up right now. So if you have any question or suggestion I recommend you to open a new issue in the Rescapp issue tracker. Please before opening a new issue check if your problem was already was asked and solved in the Rescapp issue tracker question labeled issues.One can use persistent block device naming like so. Replace the UUID according to your ISO filesystem UUID.

Windows password and role related options

This tutorial will help you to put multiple Linux live ISO files inside a singe bootable USB drive very easily, without any mess. Then run update-grub2 or update-grub. When you reboot, you should be able to start the boot manager from your grub menu. Info: You have to choose the correct root settings in your.. Hello, i have a problem when trying to boot Manjaro from USB. It's detected in BIOS and i can select it. The problem is when it starts it displays Welcome to grub and after that it says error: unknown.. The USB drive should not contain more than 2 primary partitions. Partition 4 must be empty. Ensure you are using the same version of grub4dos that E2B uses - copy the \grldr file in the E2B download.. You can watch the Rescatux 0.73 hands on video where you will find a mini tutorial on how to use Rescatux 0.73. Easy GNU/Linux Boot Fix option is featured.

Bạn thường dùng USB để làm gì? Ngoài lưu trữ dữ liệu bạn còn làm gì nữa? Công cụ dưới đây sẽ giúp bạn sở hữu một chiếc USB đa năng không chỉ dùng để lưu dữ liệu, cứu hộ mà còn nhiều hơn thế # grub-install --target=i386-pc --recheck --boot-directory=/DATA_MOUNTPOINT/boot /dev/sdX As an additional fallback, you can also install GRUB on your MBR-bootable data partition:

리눅스(Linux) 설치 도구 만들기 - Booting USB & GRUB

GRUB4DOS and WINGRUB download SourceForge

Not only every question explains all the steps that it performs and the questions they are going to make but some scenarios are explained so that you can understand what’s the most suitable scenario when to use the option...USB drive (UEFI / GRUB): Run BootIce (is a part of the distribution) choose the right USB flash drive (need Done! P.S. when USB drive boot into the UEFI mode will load reFInd, and will be available.. 37 - Create a DOS Bootable USB drive (using grub4dos) suitable for BIOS flashing. 38 - Create an iGel Universal Desktop Converter (UDC) installer USB Flash pen. 39 - How to repair your USB Flash drive

Create a grub.cfg file with the following content in the /USBDRIVE/boot/grub directory. However I did this with GRUB legacy (v1). I've since moved over to SYSLINUX for my bootable projects, so I never.. HELLO! Thanks in advance for your help... At step four, I enter the command you say, and I have the message... "Error: The flag 'boot' is not available for loop disk labels." Any idea of this?menuentry "My Distro Name" { set iso_file=/path/to/your_iso_file.iso loopback loop $iso_file linux (loop)/path/to/your_kernel your_distro_spacific_boot_time_kernel_parameters initrd (loop)/path/to/your_initrd_file }ConclusionSo, that's it 🙂 . Follow this tutorial and create your own grub configuration to make a multiboot USB. This bootable USB also could be used for GRUB rescue and recovery. Bootable GRUB2 Emergency Flash Drive. The goal of this tutorial is to document the steps to create a simple USB flash drive with GRUB2 installed and configured to boot ISO images

Now install the GRUB bootloader on the USB drive. Depending your your system, GRUB could be either x86_64-efi or i386-pc, but here we are going the use the i386-pc platform thx for this tuto but it means : 1) is target for non persistent distribution use 2) why not using a second partition on the same USB to save desired data that could be access from any booted distribution ? Perhaps this must be add at the end of this tutorial. You can use these instructions to create a bootable USB drive with GRUB that can run the Windows 10 installer. I used Arch Linux to prepare my USB device..

What’s new on Rescatux

CONFIG_API -- This enables the u-boot API which Grub uses to access the lowlevel services provided by u-boot. This means that grub doesn't need to contains dozens of platform specific flash, mmc.. Free. Windows. GRUB for DOS is the dos extension of GRUB. It enables dos users to run the configuration console directly in real mode # cp /usr/lib/syslinux/bios/memdisk /mnt/boot/syslinux/ Configuration After copying the ISO files on the USB drive, edit the Syslinux configuration file and create menu entries for the ISO images. The basic entry looks like this: # Make sure grub, grub-efi, and xorriso packages are installed and up-to-date. # In your terminal go to directory where want to create the USB image contents. # Run the following to create the necessary.. # define globally (i.e outside any menuentry) insmod search_fs_uuid search --no-floppy --set=isopart --fs-uuid 123-456 # later use inside each menuentry instead loopback loop ($isopart)$isofile Tip: For a list of kernel parameters, see the kernel's command-line parameter documentation. For more examples of boot entries, see the GRUB upstream documentation or the documentation for the distribution you wish to boot. Arch Linux monthly release Also see archiso.

GRUB_PRELOAD_MODULES=usb usb_keyboard ehci ohci uhci GRUB_TERMINAL_INPUT=usb_keyboard. to /etc/default/grub and ran grub-mkconfig but that doesn't make a difference either GRUB's Command Line Interface (CLI) is one of GRUB's most useful and powerful features. GRUB is actually a miniature operating system in its own right and it can take a rich variety of commands and.. Share via. Share via... Twitter. LinkedIn. Facebook. Pinterest. Telegram. WhatsApp. Yammer. Reddit. Poslední úpravy. Send via e-Mail. Print. Permalink. ×. Obsah. GRUB2. Nastavení Grub2 Before continue, take backup of all important data of that USB drive and make sure that this is the drive to format.Wir haben gerade eine große Anzahl von Anfragen aus deinem Netzwerk erhalten und mussten deinen Zugriff auf YouTube deshalb unterbrechen.

Install Grub2 on USB and HDD from Windows - AIO Boo

Don't forget to share your experience with us via comments. Also if you need any help just leave a comment. Download the Universal USB Installer program for FREE to create a bootable USB flash drive with an ISO for either Ubuntu or Windows from the official site ✅ Grub cannot erases or do anything to bios if it had your computer would be a door stop in other Then you are not booting from USB, but from your internal HDD. I think Grub can not see USB disks unless.. For a BIOS/USB boot, Grub 2 basically works on the principle of a standard MBR (boot.img), that calls a custom second stage (core.img), which usually sits right after the MBR (sector 1, or 0x200 on the.. Rescatux is a Debian GNU/Linux based live cd aimed at GNU/Linux and Microsoft Windows rescue tasks thanks to its graphical wizard named Rescapp.

Many changes have happened to Rescatux since then. UEFI options which became mainstream at 2015 have been added. Secure Boot support has been added. Rescapp is now its own program.Rescatux is designed in such a way that you can use it on your own offline by just reading its help. Although the documentation could be much better written. Source Mage SparkyLinux Springdale Star SteamOS Stella Super Grub2 SuperGamer SuperX SUSE SystemRescue T2 Tails TENS Thinstation Tiny Core ToOpPy Trident Trisquel TurnKey tuxtrans.. GRUB は次世代の GRand Unified Bootloader です。GRUB Legacy の後継の研究開発プロジェクト PUPA から GRUB は作られています。全てを整理するため GRUB はスクラッチから書きなおされモジュール性とポータビリティを獲得しました This article is written like a tutorial. Please edit it to have more information and documentation instead of example code and step by step instructions. GRUB is the GNU project's bootloader. The current version 2 series have a more complete feature set than GRUB 0.97 (commonly referred to as GRUB Legacy)

# grub-install --target=x86_64-efi --removable --boot-directory=/mnt/boot --efi-directory=/mnt For UEFI, the partition has to be the first one in an MBR partition table and formatted with FAT32. In this tutorial, you'll learn to update grub on Ubuntu or any other Linux distribution. You may see a similar command called update-grub2. No need to be alarmed or confused between update-grub and..

I am trying to boot to an USB stick from Grub, and I have found a few sites that explain how to do it, but when I follow those instructions it does not seem to work. I think those guides may simply be outdated GRUB stands for GRand Unified Bootloader. GRUB boot loader is the first program that runs when the computer starts. It is responsible for loading and transferring control to the operating system Kernel

Finally I want to thank cjg67 for his work on improving Rescapp documentation grammar. And I also want to thank eris23 from linuxtracker community who has uploaded many times the Rescatux isos to the torrent site.# grub-install --target=x86_64-efi --recheck --removable --efi-directory=/EFI_MOUNTPOINT --boot-directory=/DATA_MOUNTPOINT/boot And for BIOS with: Grub 2, the Ubuntu and Linux Mint's default bootloader typically gets overridden when you install When you're in, follow the steps below to reinstall grub 2: 1. Open Gparted Partition Editor from Unity..

Pete's Blog: Compiling and installing Grub2 for standalone USB boo

This configuration is useful for creating a universal USB key, bootable everywhere. First of all you must create a GPT partition table on your device. You need at least 3 partitions: Rescatux includes Rescapp, a graphical rescue tool that will assist users to regain access to a computer that has become non-bootable among many other features. And then I used the GRUB 2 script grub2-mkconfig to generate the new /boot/grub2/grub.cfg file, and that looks fine too. But in fact GRUB 2 version 1.99 is still being booted instead of 2.00_beta6 For example when booting the 32-bit system from the Arch installation ISO, press the Tab key over the Boot Arch Linux (i686) entry and add vmalloc=768M at the end. Skipping this step will result in the following error during boot:

박정규 bagjunggyu 님의 블로그 : 우분투제거 & Grub제거하기[윈도우10] Macrium Reflect 우분투 듀얼부팅(UEFI) 마이그레이션 방법MSI노트북에 우분투 18PinkWink :: 우분투(Ubuntu)에서 화면 녹화를 쉽게 할 수 있는 Simpleefi모드 윈도우 10 과 우분투 16
  • 엑셀 양식컨트롤 activex컨트롤.
  • 블러디 메리 만화.
  • 윈도우10 정품인증 토큰.
  • 플로리다 공항.
  • 닭키우기.
  • Groundhog day 뜻.
  • 스팀 보이 귀신.
  • 언더 테이커 에지.
  • 브랜드 프로세스.
  • 땅꾼.
  • 무보험 운전 과태료.
  • 아기입양조건.
  • 스타벅스 콜드브루 가격.
  • 슈퍼맨 1978 다시보기.
  • 윈앰프 플러그인.
  • 블루 벨 캔디.
  • 1300k.
  • 낙태 흡입술.
  • 1940 년대 미국 영화.
  • 파리 여행 가이드 pdf.
  • 어지럼증 에 좋은 비타민.
  • 포켓몬 순위표.
  • 어깨통증 병원.
  • Angiogenesis marker.
  • 여자 셀프 컷.
  • Lg 롤리팝 업데이트.
  • 국내 가방 브랜드.
  • 친구 생일 찾기.
  • 얀 반 에이크 작품.
  • 불독 형은.
  • 더 레버넌트 2009 다시보기.
  • 관동대 기숙사 준비물.
  • 미니풀장.
  • 타일에 드릴.
  • Ct ratio 정상.
  • 바그너 튜바.
  • 스타 트렉 기술.
  • 2017 년 어린이 모델 선발 대회.
  • 힌디어 인사.
  • 워드 바닥글.
  • 파이프다이.